Refresh your worn pavement with asphalt resurfacing in Montgomery, AL instead of a full tear out.
Refresh your worn pavement with asphalt resurfacing in Montgomery, AL instead of a full tear out. We repair trouble spots, prep the surface, and install a new asphalt overlay that smooths imperfections and extends the life of your driveway.
Legacy Asphalt Montgomery provides professional asphalt resurfacing throughout Montgomery, AL, Alabama and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (334) 367-6226 or request your free quote.
If your driveway, parking lot, or private road in Montgomery is cracked and rough but the base is still solid, asphalt resurfacing is often the smartest way to restore it without paying for a full tear out. Legacy Asphalt Montgomery focuses on resurfacing and overlays that match our local climate and soil conditions so the new surface actually lasts.
Instead of starting from bare dirt, resurfacing keeps the existing asphalt structure, repairs and levels it, then installs a new layer of hot mix asphalt on top. You get a surface that looks and performs like new, usually at a lower cost and with less disruption than complete reconstruction. For many local properties, especially those 8 to 15 years old with visible wear, resurfacing is the βmiddle groundβ between endless patching and full replacement.
We work throughout Montgomery and surrounding communities and we are familiar with the way our red clay, summer heat, and heavy rain affect pavements. That local experience matters when deciding how thick to make the overlay, how to handle drainage, and when resurfacing is truly appropriate vs. when it is throwing good money after bad.
Not every cracked or faded surface in Montgomery is a good candidate for asphalt resurfacing. Before we recommend an overlay, Legacy Asphalt Montgomery inspects several key factors on site.
First, we probe and core sample where needed to check the strength of the base and subgrade. If we find soft spots, severe alligator cracking that indicates base failure, or evidence of long term standing water, we will advise strengthening those areas before any overlay or we may recommend full reconstruction instead.
Second, we evaluate drainage and slope. Many older parking lots in Montgomery were built with minimal slope, so over the years water has pooled and weakened the pavement. Resurfacing without correcting those issues only locks the problem in. We use laser levels and string lines to confirm how water will run after the new layer is added.
Third, we consider the traffic and loading. A light residential driveway that only sees cars can often be resurfaced with a thinner course. A commercial lot in an area like Eastern Boulevard that takes delivery trucks will need different mix designs, thicker lifts, and often reinforcing under wheel paths. Our recommendations are based on how you actually use the surface, not a one-size-fits-all formula.
Finally, we discuss timing. In central Alabama, the best windows for resurfacing are typically March through early June and late September through early November, when temperatures and humidity let the asphalt cool at a controlled rate and compact properly. We can still work outside those months, but we schedule around extreme heat waves, cold snaps, and heavy summer storms.
Every resurfacing or overlay project Legacy Asphalt Montgomery completes follows a detailed sequence. This helps avoid the common failures we see on rushed jobs around town.
1) Detailed inspection and measurements. We walk the entire area with you, mark distressed zones, check transitions to concrete or gravel, note drainage issues, and measure elevations. This step is where we decide where milling or patching is needed.
2) Structural repairs. Before placing a new surface, we cut out and replace badly alligatored or sunken areas. This might involve saw cutting, removing damaged asphalt, compacting base stone, then installing new binder and surface courses to match surrounding grades.
3) Crack and pothole treatment. Wider cracks are cleaned and filled with hot rubber crack sealant so they do not reflect quickly through the new overlay. Potholes are squared off, cleaned, and patched with hot mix, then compacted flush.
4) Edge preparation and cleaning. We trim vegetation off the edges, remove loose material, and power clean the pavement so the new asphalt bonds properly. In dusty or oil stained areas we may use a tack coat or oil spot primer.
5) Milling where needed. In driveways meeting garages or lots meeting sidewalks, we often mill a thin layer off the existing surface so the new overlay will tie in smoothly and not create trip lips or drainage dams.
6) Tack coat application. We apply a bonding layer (tack) between old and new asphalt. This is critical for long term performance and is one of the shortcuts that often gets skipped on low bid jobs.
7) Installing the overlay. We place hot mix asphalt at a thickness appropriate to your use, then compact with vibratory and static rollers in multiple passes. Joints are staggered and compacted tight to prevent early cracking.
8) Final rolling, edges, and cleanup. We smooth the mat, seal edges where needed, and remove debris. Striping can usually be applied within 24 hours, depending on weather.
Resurfacing is not just about thickness. The mix design, additives, and layout choices you make impact how your pavement stands up to Montgomery conditions and traffic.
For residential driveways, we typically use a fine surface mix that compacts tightly and gives a smooth appearance for car and foot traffic. In shaded neighborhoods with more tree debris, we may suggest slightly coarser aggregate for better grip and drainage.
Commercial and industrial sites often need a heavier duty mix with harder aggregates and different asphalt binder grades that resist rutting under delivery trucks and garbage trucks. Around loading docks or dumpster pads, we sometimes combine resurfacing with thicker patch areas so heavy wheels do not damage the surface.
We also consider color and heat. Standard asphalt is dark and absorbs heat, which can soften the surface in August heat waves. While full color coatings are more common on new pavements, we can discuss sealcoat and coating schedules to help control surface temperature and slow oxidation after resurfacing.
Layout and striping are part of design too. When resurfacing parking lots in older properties, we often improve traffic flow and safety by adjusting striping, adding loading zones, or modifying ADA spaces to current standards. Planning this before the overlay helps us ensure transitions, slopes, and ramp locations meet guidelines instead of trying to force changes after the asphalt is down.
Customers often ask why two driveways or lots of similar size can have very different resurfacing quotes. Legacy Asphalt Montgomery breaks down the main cost drivers so you can compare estimates fairly.
Surface preparation is one of the biggest factors. A relatively sound lot that needs light crack filling and a simple tack coat will be far less expensive than a surface with extensive base repair, milling, and leveling courses. If we must correct long standing drainage issues or rebuild soft spots, that work adds up but also dramatically improves longevity.
Thickness and mix type matter as well. A 1 inch overlay for a light use driveway uses much less material than a 2 inch overlay engineered for a busy commercial center. Specialty mixes for heavy trucks or high traffic intersections cost more per ton but are often the right long term investment.
Access and staging can impact labor. A simple open driveway off a wide street is quicker to pave than a complex townhome community with tight turns, many parked cars, or night work requirements. In downtown or busy commercial areas, we may need to phase the work or schedule off hours to keep businesses open, which can slightly increase project time.
Finally, timing and coordination play a role. Combining multiple properties in the same area or resurfacing several sections of a large complex at once can reduce mobilization costs per square foot. We are always happy to discuss options like coordinating with neighboring properties or HOA sections to stretch your budget further.
Asphalt overlays sometimes get a bad reputation because people see jobs that failed in only a few years. In our experience around Montgomery, those problems almost always come from skipped steps or ignoring drainage and base issues.
Reflective cracking is the most common issue. If existing deep cracks or failed areas are not properly repaired and sealed, they will mirror through the new surface. We address this with thorough patching, crack treatment, and in some cases reinforcing fabrics or leveling courses before the main overlay.
Ponding water is another frequent complaint. When contractors simply follow the existing grades without correcting low spots, water pools and weakens the new surface. We take elevations and adjust the overlay thickness strategically to restore positive drainage, particularly near building entrances and handicap ramps.
Raveling and peeling can occur where tack coat was applied poorly or the surface was dirty or oily. Our crews take time to clean and prime the pavement and we do not place asphalt over visibly compromised areas without addressing contamination first.
Edge failures are common in rural driveways and side roads with no curb. Heavy vehicles running off the edge cause cracking and breakup. We recommend edge strengthening, such as widening slightly, using stronger mix at edges, or adding compacted shoulder material so tires are supported.
By talking through these potential issues before we start, you know exactly what we are doing to prevent them on your property.
Proper scheduling and simple preparation steps help ensure your resurfacing project goes smoothly and the new surface cures correctly.
In Montgomery, we try to avoid paving during heavy rain forecasts or early morning cold snaps, especially in late fall and winter. Asphalt needs a warm, relatively dry surface and air temperature to compact and bond well. If the forecast looks risky, we will discuss rescheduling rather than rushing the work.
For residential driveways, plan on keeping vehicles off the new surface for at least 24 hours, and up to 48 hours in cooler or very hot conditions. You can usually walk on it after a few hours, but we recommend avoiding sharp turns by stationary steering and parking heavy vehicles in the same spot for the first week.
For commercial lots and multifamily communities, we can phase the project so that only portions are closed at a time. We provide a clear schedule so tenants, customers, and deliveries know which sections will be accessible each day. Signage and cones help guide traffic around active work zones.
You can help by moving vehicles, trailers, and portable basketball goals off the pavement the evening before work. If you have irrigation, we ask that you turn it off the night before and keep it off until the surface has cooled and cured. Let us know about any underground utilities, gate codes, or special access needs ahead of time.
Legacy Asphalt Montgomery is local, so if you have questions or concerns after the job is complete, you are not dealing with a traveling crew. We can return to inspect, explain curing or minor surface marks, and help you plan sealcoating and maintenance to get the longest life from your new overlay.
Professional asphalt resurfacing & overlays, done right the first time, quality materials, honest pricing, and results that last.Legacy Asphalt Montgomery